Why is the design temperature of an UFH system not being met?

If the design temperature of an underfloor heating system is not being achieve, you should check the following:

  • Check all control valves are correctly installed in their correct orientation and that any remote sensors are installed and located in a suitable position.
  • Check the temperature settings are as per design and adjust as necessary, depending on the water temperature control system used.
  • Check the primary water temperature is not too low. This needs to be at least 10 degrees in excess of the UFH system water temperature

Couldn't find what you were looking for?

Alternatively you can speak to a member of our team - Subject to Operating Times

Return to top
Are you a homeowner? Please click here.