Following the launch of its first R32 air source heat pump last year, Grant UK is pleased to announce the launch of four new models with outputs ranging from 6kW up to 17kW.
This summer, four new Aerona³ R32 inverter driven air source heat pump models will be available from Grant UK which all incorporate the more environmentally friendly R32 refrigerant. The range will consist of 6kW, 10kW, 13kW and 17kW models. These heat pumps are not only cleaner and more sustainable working products, they are also exceptionally efficient achieving an A+++ energy rating at low temperatures such as 35°C or 45°C (new ErP labelling from September 2019).
The development of these new models, Grant’s greenest heat pump range yet, is in response to the growing demand for products which have a lower impact on the environment. The 2014 EU Fluorinated Greenhouse Gas (F-Gas) Regulations is legislation designed to phase down the use of hydrofluorocarbons, with the introduction of a series of targets which are designed to limit the use of gases which have the highest Global Warming Potential (GWP). Grant’s latest Aerona³ air source heat pumps use R32 refrigerant which, while still an HFC, has a GWP of 675 which is considerably lower than other typical heat pump refrigerants such as R410A (GWP 2088), requires less refrigerant volume per kW and offers higher efficiencies.
All four of the new R32 models not only have incredible SCOP values delivering improved efficiencies and performance levels, but each heat pump also has the familiar features that installers have come to associate with the Aerona brand. The latest heat pumps are all monobloc in design, single phase, DC inverter driven, have built-in weather compensation and base tray heating element. Furthermore, each model is also available as a pack consisting of the R32 heat pump and its key accessories.
The new Aerona³ R32 models will supersede the current heat pumps available from Grant UK with their four current air source heat pumps being replaced by the R32 equivalent models. The Aerona³ R32 6kW and 10kW models will be direct replacements for the existing R410 6kW and 10kW heat pumps. The new 17kW model will supersede the Aerona³ R410 16kW heat pump and the Aerona³ R32 12kW heat pump will be replaced by the new 13kW model. These model transitions are due to be completed later this summer.
Quiet in operation and compact in size, these latest Aerona³ R32 heat pumps have minimal impact on their surrounds both aesthetically and acoustically. The heat pumps are also available with a guarantee of up to 7 years (subject to full T&Cs and status) which reflects Grant’s confidence in the products.
In addition, Grant's VortexAir Hybrid models also incorporate the latest Aerona³ R32 17kW air source heat pump. Available in two models, the VortexAir Hybrid combines a blue flame oil-fired boiler (15/21kW or 21/26kW) with an Aerona³ R32 17kW heat pump.
This latest product offering from Grant UK further develops the range of air source heat pumps available from the Company, combining even greener technology with the trusted attributes of the Aerona³ and Grant brands.
For more details about air source heat pumps, please click here.